Professional Motorcycle Engine Rebuilds & Performance Tuning
We get deep into the heart of your machine, from surgical engine rebuilds to precision tuning, ensuring your bike runs better than the day it left the factory.
A look at the workbench with a Yamaha R3 crankshaft and a fully assembled Husqvarna engine. We handle complex bottom-end jobs, replacing bearings and resetting cranks to get them running perfectly.
We love the smell of two-strokes. Here's a look at a Husqvarna SMS 125 engine rebuild, where we replaced the cracked crankcase and are getting it ready to scream again.
Part one of our Yamaha YZF-R6 engine rebuild. Our team is getting hands-on, stripping the engine down to diagnose and fix the issues.
Part two of the Yamaha YZF-R6 engine rebuild. With the engine block cleaned and prepped, we're starting the careful process of reassembly.
One of our mechanics, Arif, meticulously working on the Yamaha YZF-R6 engine rebuild, using precision tools to ensure every component is perfect.
A focused shot of the R6 engine block during the rebuild process, with me in the background overseeing the work.
Another perspective of the Yamaha R6 engine rebuild, highlighting the complexity of a modern superbike engine.
Arif using Knipex pliers to handle delicate components inside the Yamaha R6 engine during its full rebuild.
Can you guess the engine? This is a close-up of a 180-degree crank twin, showing the intricate gearing and crankshaft assembly we work on.
The complete bottom end of the 180-crank twin engine, mounted and ready for the next stage of its rebuild.
About Engine Rebuilds & Performance Tuning
When we pull your engine, we don't just 'fix' it. We split the crankcase, check every bearing, and verify tolerances against factory specs, because skipping a step is how you end up back in the garage later. It’s a surgical process, whether we’re reviving a vintage two-stroke or tuning a modern superbike, so don't expect a quick, cheap patch-up.
At Greasehouse Garage, we treat every engine like it is our own personal ride. Whether you have a modern superbike that is losing compression or an older machine that needs a full bottom-end refresh, we apply the same technical discipline we use for our race bikes.
The Greasehouse Approach to Engine Work
We believe in doing the job once and doing it right. If your bike has engine noise or performance issues, we start with a full diagnostic. We don't guess—we inspect. Our team handles everything from crankshaft balancing and valve clearance adjustments to cylinder boring and headwork.
- Two-Stroke Specialists: We have a massive soft spot for the raw power of two-strokes. If you have a classic Husqvarna or a Suzuki Shogun, we know how to make them scream again.
- Modern Superbike Precision: From Yamaha YZF-R6 rebuilds to modern EFI diagnostics, we handle the complex stuff. We use precision measuring tools to ensure every shim bucket, valve, and gasket is perfectly spec'd.
- Performance Tuning: It is not just about bringing a bike back to life; it is about making it faster and more reliable. We install big bore kits, high-lift cams, and performance clutches. We also verify everything on the Dyno to ensure your Air-Fuel Ratio (AFR) is spot on.
What to Expect
Engine work is complex and time-consuming. When we take on a build, we are committed to the details—replacing seals, cleaning oil galleries, and ensuring the transmission shifts like butter. If you are looking for a reliable, honest engine rebuild in Bengaluru that prioritizes performance and longevity over quick-fix solutions, you are in the right place.
IndiMotard Adventures
I'm Anand, and this is my team at Greasehouse. We live for the mechanical challenge of an engine rebuild, whether it's a 1955 Bullet or a high-strung superbike. We don't cut corners, and we don't do fluff; we just build bikes that run hard and stay together.
Need something specific for your bike?
Search our services or browse related categories.
More from Motorcycle Service and Customization by IndiMotard Adventures
More services by IndiMotard Adventures