Electrical & Network Infrastructure
Available across Jamshedpur
We set up labelled wiring, reliable ABB KNX panels, full-home Mesh Wi-Fi including outdoors, our own power stabilizer, and tidy cooled racks so your smart home runs smooth and is easy to maintain.
Pricing Guide
Managed Wi-Fi 6 Mesh Infrastructure
Hardware & Infrastructure
- Access Points: Supply of Alta Labs Wi-Fi 6 APs (AP6-Pro/Standard) featuring Qualcomm networking platforms.
- Cabling: Structured CAT6/CAT6A Gigabit cabling run from central rack to ceiling (approx. 60m per point).
- Mounting: Low-profile kits for seamless ceiling or wall integration.
Configuration
- Seamless Roaming: Mesh technology setup allowing movement between rooms without call drops.
- Traffic Segmentation: Multi-Password Authentication to separate Guest, IoT, and Private networks.
- Outdoor Coverage: IP68-rated AP integration for terraces or gardens where applicable.
Optimization
- Signal Analysis: Pre-install heat mapping and post-install fine-tuning.
- Interference Tuning: Channel width optimization to minimize clash with neighboring signals.
Engineered AV & Data Rack (Active Cooling)
Rack Structure
- Cabinet: Professional Grade 27U to 42U floor-standing rack with glass front door and lockable sides.
- Cable Management: High-density vertical and horizontal managers using Velcro straps to protect wire integrity.
- Organization: Color-coded patch cables and smart tagging for all inputs/outputs.
AC Infinity Thermal System
- Active Cooling: Integration of CLOUDPLATE T7/T9 intake and exhaust fans.
- Smart Controller: Digital probe measuring real-time temperatures to auto-adjust fan speed.
- Airflow Design: Strategic vent placement for optimal AV receiver and server cooling.
Power & Accessories
- PDU: Rack-mount Power Distribution Unit with overload protection.
- Shelving: Heavy-duty vented shelves for non-rack-mountable gear.
Electrical DB Design & Precision Dressing
Organization & Safety
- Routing: Right-angle wire routing and spiral banding for a clean internal layout.
- Termination: Secure tightening of connections to prevent loose contacts and hotspots.
- Bundling: Neatly grouped neutral, earth, and phase wires using cable allies.
Identification System
- Tagging: Alphanumeric ferrule tags applied to every wire entering the DB.
- Mapping: Laminated load charts inside the door panel identifying specific MCB controls for every room.
Scope Note
- Exclusions: Cost covers design, labor, and dressing consumables only. Supply of DB box, MCBs, and RCCBs is charged at actuals.
SyncPro Static Voltage Stabilizer (IGBT)
Technology & Protection
- Static Design: IGBT-based stabilizer with no moving parts for silent operation.
- Response Speed: Ultra-fast voltage correction in under 20 milliseconds to neutralize spikes.
- Surge Defense: Integrated Type 2 Surge Protection (20 kA) against grid switching or lightning.
Specifications
- Regulation: Corrects wide input range (170V-270V) to a precise 230V output.
- Safety Features: Automatic cutoff for overload, short circuit, and extreme voltage variance.
- Bypass: Manual and automatic switch to ensure power continuity during service.
Installation
- Integration: Hardwired connection to the main AV Rack or Automation DB input.
- Verification: Testing of Neutral-Earth voltage limits for sensitive electronics.
About Electrical & Network Infrastructure
Solid Wiring & Neat Panels
I make sure every wire and panel inside your home is set up right from the start. Flawless electrical distribution board setup is my thing, with all wires labelled and tucked away so you won’t find a mess when you open your panel. Using ABB KNX modules means the backbone of your place is strong and reliable. If you ever need to upgrade or fix something, finding the right cable will be simple.
Full-Home, No-Nonsense Wi-Fi
Nothing worse than Wi-Fi dead spots. I use Mesh WiFi 6 home coverage tech, so you get strong signal everywhere – even outside. Whether you’re on a Zoom call in the bedroom or streaming in the backyard, the speed keeps up. Outdoor Wi-Fi points are weatherproof, so rain or shine, your network holds up.
Keeping Your Gadgets Safe from Bad Power
Power surges and voltage drops can fry your expensive tech. I install a power surge and voltage stabilizer for smart homes that I’ve designed myself. It keeps everything running smooth, helps your electronics last longer, and saves you the headache of sudden breakdowns.
Tidy Racks, Cool Gear
All your routers, servers, AV stuff – I build pro racks so it doesn’t look like spaghetti inside your wall. Cooling fans adjust on their own, staying whisper-quiet so your movie nights aren’t ruined by noise. Everything stays at the right temp, no matter how hard your gadgets are working.
Our Approach
Yeh jo ride hai (this journey) with clients and architects is what I love. It’s not about pushing products, it’s about building a reliable backbone for your smart home.
Meet your Expert
DTI Automation
21 connects in last 3 months
My Story
DTI Automation started off with a simple idea: bring tech together so it actually works for you. We’re not just another installer, we’re the folks who solve those annoying tech puzzles. Our team’s like family—one day we’re at expos showing off SyncPro, next day, cricket ground for DTI Premier League. Yeh jo ride hai, it’s all about teamwork and geeking out over the tiniest wiring details. That’s what keeps us pumped.
My Work
Smart Home & Home Cinema Solutions - We do home automation, lighting control, audio-video, power stabilizers, network setups, and system integration.
Innovative In-House Tech - We build our own drivers for Control4, SyncPro offline voice control, and gesture recognition. No boring off-the-shelf stuff.
Collaboration, Not Just Installation - We work with you and your architect, treating every project like it’s our own—right down to every DB wire.
Solving Hidden Problems - From AC Infinity cooling to static power stabilizer for automation, we fix things you might never notice but always need.
